Useful light
The distribution supports sorting, scanning, loading and moving goods across connected operational zones instead of maximising lumens outside the area that matters.
Industrial indoor lightingCommercial investigation · industrial LED lighting
LED logistics centre lighting
Logistics centre lighting divides a complex facility into operational zones, then coordinates optics, maintained targets and controls across racks, conveyors, docks and high-traffic circulation.
- Logistics centre lighting layout based on geometry and the required result, not wattage alone
- Optics and output aligned with mounting height, aisles and visual tasks
- Explicit assumptions for operational zones, material flow, conveyors, docks and changing occupancy
- A direct connection between calculation, suitable product series, evidence and quote
Industrial indoor lighting
Application pages
Where this solution fits
Start by confirming the site types that belong on this path and the cases that need a different solution.
Industrial indoor lighting
What the project should achieve
A useful specification balances visual performance, reliability, operating cost and the realities of installation.
Controlled glare
Position, optics and aiming account for users and vehicle approaches, scanning stations and long views through open dispatch areas.
Predictable operation
Controls, environmental conditions and maintenance access are part of selection rather than an afterthought after pricing.
A verifiable specification
The result connects targets, visible assumptions, the proposed variant and evidence the project team can check.
Commercial investigation · industrial LED lighting
Design criteria
These are the decisions that shape fixture selection, photometric work and the final quote assumptions.
| Design criteria | Design approach |
|---|---|
| Operational zoning | Separate storage, sortation, scanning, cross-dock, dispatch and support zones before assigning targets or luminaires. |
| Material-flow geometry | Map conveyors, chutes, docks, doors and vehicle paths because they affect obstruction, vertical light and glare. |
| Ceiling and services | Coordinate trusses, sprinklers, automation and future equipment zones with the mounting and maintenance grid. |
| Operating pattern | Continuous zones and intermittently occupied aisles need different sensor delays, grouping and fallback behaviour. |
| Indoor–outdoor transition | Review brightness changes at dock doors and interfaces without using indoor high bays as a substitute for apron lighting. |
Design criteria
Selection guide
Use these comparisons to narrow the system direction before choosing an individual model.
- Start with geometry
- Dimensions and mounting positions determine the useful distribution before wattage is considered.
- Use maintained targets
- Design for the required maintained result and declared maintenance assumptions, not initial lumens alone.
- Compare the distribution
- A lower-power fixture with the right optic can be more useful than a higher-output fixture with poor placement.
- Check the environment
- Temperature, dust, moisture, impacts, corrosion and electrical conditions can change the suitable series.
- Keep assumptions visible
- Any missing drawing, target or operating condition should remain explicit until the project team confirms it.
Design criteria
Standards and verification notes
Applicable targets depend on the country, site and project class. Final compliance must be checked against the current project brief and calculation.
Explore the solution family
Suitable product series
Published DinaLED models are shown only where the current product data supports this application direction.
high-bay-lightsBright Moon LED High Bay Light
Slim circular high bay for indoor industrial and commercial areas.
100 W / 150 W / 200 W / 300 W100 lm/W
high-bay-lightsGaia S High Bay Light
Anti-glare LED high bay light for factories, warehouses, courts and market halls, with chain or rod mounting and a 100 degree beam.
100 W / 150 W / 200 W80 lm/W
high-bay-lightsPolaris GK-BJX LED High Bay Light
Modular industrial high bay series with 100 W to 300 W configurations.
100 W / 200 W / 300 W140 lm/W
high-bay-lightsUranus High Bay Light
Industrial LED high bay light for warehouses, factories, gymnasiums and retail halls, with 100-200 W output and 70/80 degree optics.
100 W / 150 W / 200 W150 lm/W
high-bay-lightsUranus S GK-TWX-S LED High Bay Light
Uranus S high bay series with external and built-in driver configurations compared on one product page.
100 W / 150 W / 200 W140 lm/W
high-bay-lightsVenus LED High Bay Light
Compact circular high bay series for economical warehouse and workshop lighting.
100 W / 150 W / 200 W / 300 W100 lm/WIP65
Related lighting paths
Industrial LED high bay lighting
A project route for high-ceiling industrial interiors where geometry, rack layout, working conditions and maintenance access determine the right luminaire system.
LED warehouse lighting
Warehouse lighting designed around rack orientation, picking tasks, vehicle routes and occupancy patterns rather than a one-wattage-for-every-zone schedule.
Commercial LED parking lot lighting
Parking-area lighting for vehicle bays, circulation and pedestrian routes, with pole placement and boundary spill considered in one calculation.
LED industrial yard lighting
Outdoor industrial lighting that separates loading, circulation, storage and security zones while controlling glare for vehicles and nearby properties.
FAQ
Questions buyers and designers ask
A coordinated lighting approach for storage, sortation, cross-dock and dispatch zones that operate differently but share one logistics site.